If you’re a professional electrician, you’re likely always looking for cutting-edge equipment that quickly gives excellent results for all your electrical projects. Most tools are readily available, but you know that certain high-quality, branded equipment may last for decades if you’re in the electrical profession. If such devices have been with you for quite some time, you can also find a Greenlee tool repair center; for example, if you have such tools that need refurbishing rather than getting a new one, repairs can save you money. Others are generally referred to as “throw away tools” that must be replaced repeatedly with transparent tape.
Even if you’re just getting started or building an electrical kit for home use, choosing the appropriate equipment will save you a great deal of time and trouble in the long run. This article will assist you in selecting some of the best gear that every homeowner, novice, and professional electrician needs:
Electrical Tools
Pliers
Pliers, also known as cutting pliers or lineman pliers, are a must-have on any list of electrical tools. Primarily, they are utilized for cutting wire and grasping, twisting, bending, and straightening wires. Any prepared electrician has a variety of pliers, including needle nose pliers, side-cutting pliers, and reaming pliers, in their toolbox or vehicle for tightening locknuts, fittings, and caps.
Screwdrivers
Electricians utilize various screwdrivers to loosen and secure varied hardware. Numerous experts now carry flexible and adaptable screwdrivers with interchangeable bits, ensuring they never lack the appropriate electrical maintenance instrument.
Level
When installing light fixtures, it is essential to locate accurate placement sites. The absence of a standard level from an electrical tools list is inexcusable, as it assists electricians in positioning fixtures, screws, and other installations precisely where they should be.
Electrical Contractor Application
The days of carrying a clipboard and burdening homes with crumpled, handwritten estimates and bills are history. With a complete, cloud-based residential and commercial services software solution, electricians are equipped with the appropriate digital tools to make client service, estimates, sales, and billing quick and straightforward.
Cable Clamps
These affordable fasteners, often known as zip ties, are ideal for securing electrical cables and wires. Using cable ties, you can keep your electrical space clean and orderly.
Measuring Tape
When cutting and stripping wire, it is necessary to have precise measurements when working with the wiring. The task can be accomplished using a standard retractable tape measure, although models with magnetic tips, multi-step locking, and other features simplify the procedure.
Conductive Tape
This sticky substance, made from plastic, vinyl, or fiberglass fabric, is necessary for insulating wires and other electrical materials. Electrical tape stops the flow of electrical current to other wires and the risk of electrocution when touching live wires.
Electric Hammer
Frequently, electricians must remove existing hardware to access wires and other electrical components. A portable electric drill with several bits expedites these procedures and enables experts to attach specialized bits (such as the reaming bit; see below) for industry-specific applications.
Essential Electrical Equipment
Cable/Wire Lugs
Like jumper cables and automobile batteries, wire and cable lugs link wires to power-requiring appliances, lines, and other equipment.
Wire Stripping Tools
Professional electricians often remove the plastic covering off wires to expose the copper and create bespoke connections with other wiring or components. This vital electrical maintenance instrument is available in several kinds and varieties.
Coaxial Connector
Coax connectors connect cables to devices while preventing the line from being shredded. There is a range of connections, and maintaining a selection on hand guarantees that you can always satisfy your clients’ demands.
Terminal Block
These insulated, modular devices aid electricians in combining several cables. They are used to connect the wire to the ground or connect electrical outlets and switches to the mains.
Voltage Indicator
To securely do electrical work, the circuit breaker must be turned off in essential areas of the property. A portable voltage tester enables electricians to test power outlets to determine whether it is safe to operate on them. Electricians also use this device to ensure that power has been restored.
Lingering Bit
Installing new conduits or replacing old tubes involves joining various pipe segments to form a wire path between electrical components. Attached to an electric drill, a reaming bit enlarges the aperture on one end of the pipe, allowing it to connect to another piping segment and create a secure conduit.
Fishing Tape
The fish tape is one of the many widely used electrical tools. It is used to run wire via conduit piping between gang boxes (or other electrical components). The fish tape is contained in a retractable coil and may be fed into conduit piping that has been installed. Once the end of the fish tape shows on the opposite side, wiring may be attached to it, and it can be retracted, therefore drawing the wire along the conduit.
Fishing Equipment
Fishing rods are vital electrician equipment when putting wire through walls, under carpets, or above ceilings. Typical fishing rods are fiberglass and include hooks at the end for maneuverability.
Connector Bend
When establishing a wiring path, electricians frequently run wires around the wall’s corner or other concealed regions. Conduit benders are electrical tools used to bend conduit pipes to meet these routes and guarantee that conduits are efficiently put in the customer’s house.
Fusion Connector
These plastic clips assist electricians in making rapid connections between several wires. They are compatible with various cords, such as device wires, telephone cables, and electrical cables.
Illuminators
Working in the dark is a significant threat for an electrician. Keep necessary electrical equipment, such as flashlights and other work lights, within easy reach.
Electrical Safety Instruments
Safety Eyewear
Electricians must wear eye protection when carefully inspecting electrical wiring or utilizing power tools. On every job site, both novices and seasoned electricians must have a pair of safety glasses as part of their necessary equipment.
Insulated Gloves
Electricians are at risk of electrocution. Thus they must take measures. Insulated gloves give an additional layer of safety, so include them among your electrical maintenance equipment. Choose the insulated gloves that best suit your needs in terms of fit and comfort.
Fire-Resistant Work Shirt
Skilled electricians are instructed to prevent arc flashes, electrocution, and fires. They will be required to wear fire-resistant work shirts to prevent major burn injuries as part of this training.
Circuit Detectors
Frequently, it is difficult for electricians to determine which outlets are connected to which circuits in a home. Modern electricians utilize circuit finders with two primary components: a portable digital transmitter and a tiny receiver plugging into the property’s outlets. When an electrician holds the transmitter up to the circuits in the breaker, the gadget transmits a signal to the receiver. It indicates which circuit the outlet belongs to.
Rescue Rod or Hook
Rescue rods or hooks retrieve heavy objects or electrocuted victims from hazardous areas. Because a potentially lethal electrical current may still be active, emergency personnel must use the rescue rod to take a victim away from the electrical source safely.
Circuit Analyzers High-Tech Electrical Equipment
Circuit analyzers, computerized hand-held equipment for electricians, give instantaneous information on the circuit linked to a particular outlet. These electrical maintenance instruments assess voltage, polarity, line voltage, and more in seconds.
Bag or box for Tools
What use are tools if they cannot be arranged and transported? Regardless, the tool carrier may also appear to be a generic tool. These producers of specialized toolboxes cater to electricians. These often have waterproof, non-conductive bottoms, hardshell covers for multimeters, and an abundance of storage space for all of the instruments mentioned above.
You Must Have Them
When it comes to electricians’ tools, it’s safe to assume that each electrician has a must-have item, which varies according to their work.
Electrical work cannot be performed without the proper equipment, and there are specific things that an electrician must have to perform their job safely and correctly.