If you utilize concrete anchors incorrectly, you may have a frustrating experience. It has the potential to cause severe bodily injury. Each anchor is placed in its distinct manner and has its quirks. If you are not sure which one to utilize in which case, this might be challenging. The below-given pointers would help you know the types of concrete anchors. This might solve a majority of your doubts that are related to concrete anchors.

CONCRETE ANCHOR TYPES

On a typical building site, there are dozens of different types of concrete anchors. You can use various types of anchors based on your needs. The most powerful anchoring methods use resin-based anchors installed with two-part epoxy. These are most typically seen on industrial and commercial projects and are either expensive or specialized to be used daily unless designated by an architect or engineer.

Some anchors have bolt heads that pop off at a specific torque threshold. They leave the threaded bolt and flange to show the precise tension needed to fasten the anchors. These are likewise incredibly costly and are reserved for tasks requiring fine tolerances and total safety. Consider a long-span bridge or a nuclear power plant.

Sleeve and Wedge Anchors

Wedge anchors and sleeve anchors are both great forms of concrete anchors that can support a significant amount of weight. They give pullout and shear force strength. Avoid coming closer than 3-inches to the edge of the concrete due to the spitting/wedging power they exert on it. If you do, you risk breaking off a piece of the slab.

Concrete Anchors with a Large Diameter

Tapcon brand Heavy-Duty Anchors, for example, have numerous significant benefits over other types of concrete anchors. They can, in particular, be removed but not reused. However, once removed, the hole cannot be reused.

Plastic Anchors and Lag Shields (Lead Shields)

Lag shields (sometimes known as lead shields) and plastic anchors act in the same way. You drill the proper size hole, insert the anchor, and then screw it in. This causes the metal or plastic to expand, securing it in place. These are best suited for light-duty anchoring, especially true for plastic anchors, which is not suggested for concrete where higher pull-out strength is required. Plastic concrete anchors are suitable for lightweight objects, depending on the size of the anchors.

Tapcon Concrete Screws

It is not an exaggeration to state that Tapcons have altered the course of history. Drilling holes and putting plastic anchors was a major nuisance. Plastic anchors did little to improve the appearance of the walls when we removed the exhibit and all that was left were small colorful circles on the wall.

There are many more, such as hammer drive anchors, adhesive anchors, and epoxy anchors. You can also opt for best anchor brackets in Wisconsin through a reliable service provider. Others may be introduced in larger commercial or industrial areas. All types of concrete anchors are quite simple to install with the right equipment.