Did you know that the average person uses between 80 and 100 gallons of water per day? That’s a lot of water flowing in and out of your home to flush the toilet, take a shower, and wash dishes. This is especially true if you have a large family.
But, water conservation is more important than ever before. Using less water protects the environment and saves money. The only problem with water-efficient faucets, however, is when the water pressure is low.
If you have low water pressure, you can’t effectively wash dishes, and your shower might be very uncomfortable. Are you wondering how to raise water pressure in the home? Keep reading below to learn why your shower water pressure is bad, and what to do about it.
Find the Problem
Is your home water pressure low? Many times, the pressure is just confined to one sink, shower, or fixture. If you notice low water pressure, go throughout your home and test every faucet for a minute or two.
If you have a single sink with low pressure, then you know the problem you face is fixture-related, not pipe-related.
Is your shower water pressure low? Try all your showerheads to see if it’s a house-wide problem or limited to one shower.
Install New Fixtures
When you find the problematic fixture, you’ll want to take it off, and at the bare minimum, give it a thorough cleaning. Over time, sink fixtures and showerheads can develop limescale buildup as it deals with hard water day in and day out.
Rinse with water and soak in white vinegar to remove this buildup. Make sure you reattach the fixture properly and ensure you replace any rubber gaskets to create a tight seal.
This could also be a good time to buy new fixtures. Some fixtures try to conserve water, which results in weak water pressure. But, you can find water-saving fixtures that are designed in a way that increases pressure rather than decrease it.
So don’t be afraid to spend a bit of money on a quality faucet and shower head, as they will help you save money and give you the pressure you desire.
Call a Plumber When Water Pressure Is Low
Swapping out a shower head is one of the easiest things you can do on your own. Just unscrew the old one and screw on the new one. But when replacing a sink faucet, it’s usually best to call a plumber, unless you are very confident in your handyman skills.
You’ll want to make sure the water lines are attached properly, and that the faucet is sealed to prevent any leaks.
Also, if you determine that your water pressure problem isn’t limited to just one fixture, but plagues the entire home, you’ll want to call a plumber.
Finding the problem can be difficult, and solving it even more so.
A Comfortable and Convenient Home
When water pressure is low, you don’t have to deal with it. For most people, solving this is actually quite easy, as it just requires the cleaning of a sink or shower fixture, or the replacement of an outdated one.
Bigger water pressure problems can be solved by your local plumber to ensure your home is comfortable and convenient.
Looking for more household tips? Visit our blog now to continue reading.